This is a new and reusable mould made from thick transparent plastic. Use this mould to make large slabs of soap which you can sell by the slice!
You'll get 12 soaps out of this - each measuring approximately 1¾" by 1¾" by 1" deep. (That's approx. 45mm by 45mm by 26mm deep for those of you who prefer metric!)
You don't have to slice the slab like this of course, but there will be appropriate markings on the soaps you cast using this mould.
The whole slab will weigh approx. 740g (1lb 10oz) which means that each of the 12 soaps will weigh approx. 60g (2.1oz)
Don't forget to have a look at our other SOAP SLAB MOULDS plus our SOAP TUBE MOULDS and all our other SOAP LOAF MOULDS that you can sink your finished soap tubes into!
The overall size of the soap slabs you make from this mould will be just over 7" x 5½" (185mm x 140mm) and they will be just over 1" (26mm) deep.
(HANDY HINT: You don't have to fill the mould! If you'd prefer thinner soaps then simply don't fill the mould to the top!)
Postage is FREE to UK buyers who spend over £30. (Basket total must be over £30 after any discount codes you might have used, see below).
If you spend over £30 you can get a £5 discount! Simply type giveme5 into the promotional box during checkout.
HANDY HINT: If your basket goes below £30 after using the "giveme5" code, simply add another mould to take your basket total over £30 and you'll get FREE POSTAGE too!