SOAP SLAB MOULD No 1 (10 in 1) | Denny Craft Moulds

PLEASE NOTE:
I'm away on holiday until Monday 20th September. All orders placed by midnight on Thursday August 26th have been sent out to you. For more info please see our DELIVERY page.
Feel free to place orders, but please remember that they won't be processed until after I get back.
(Press CTRL F5 to refresh this page and see if this message is up to date)

Categories

GARDEN CONCRETE MOULDS

Search

Newsletter

Please Fill in your email address to receive our newsletter.

Links

-	HELP PAGES
-	TidyEcommerce

Show All Links

Soap Slab Moulds > SOAP SLAB MOULD No 1 (10 in 1)

Soap Slab Moulds SOAP SLAB MOULD No 1 (10 in 1)

This is a new and reusable mould made from thick transparent plastic.

Use this mould to make large slabs of soap which you can sell by the slice!

You'll get 10 soaps out of this - each measuring approximately 3½" by just over 1¾" by ¾" deep. (That's approx. 9cm by 4½cm by 18mm deep for those of you who prefer metric!) You don't have to slice the slab like this of course, but there will be appropriate markings on the soaps you cast using this mould.

The whole slab will weigh approx. 900g (2lbs) which means that each of the 10 soaps will weigh approx. 90g (3.2oz)

Don't forget to have a look at our other SOAP SLAB MOULDS plus our SOAP TUBE MOULDS and all our other SOAP LOAF MOULDS that you can sink your finished soap tubes into!

Each slab you make will measure approx. 9¾" x just over 7" (24½cm x 18cm) and they will ¾" (18mm) deep. (HANDY HINT: You don't have to fill the mould! If you'd prefer thinner soaps then simply don't fill the mould to the top!

Price
£5.99